Skip to main content
Announcements Announcements
Edgenuity Help Center

Setting an IP Registry for Educators

To follow the steps listed below, you will need to have "Manage Secure Educator Access" checked under District and School Settings. To validate your permissions, click here

  1. Under the Administration tab, select School Settings.
    Admin tab- School Settings.png
  2. Select the Secure Access tab.
    IP Registry- Secure Access tab.png
  3. Click Edit under the Educator Access Controls box.
    IP Registry- Educator- Edit Button.png
  1. Click IP Address Registry under the drop-down menu.
    4- Edit Educator Access Controls- IP Reg.png
  2. Click Configure IP Address Registry.
    5- Configure IP Address Registry.png
  3. On the IP Address Registry tab, click Add IP Address.
    6- Add IP Address button.png
  4. Enter the IP Address for your school. If you have a range of addresses in the same octet, just enter the ending address in the Range box.
    7- Enter IP Address.png

    If you are going to set up IP Registry for students and educators, have your local network configured to have separate subnets to separate the users connecting with them.

  5. Click Save.
    8- Save.png
  6. Click Save.
    9- Save.png
  • Was this article helpful?